Brother Wi-Fi Direct 매뉴얼 - 페이지 15
{카테고리_이름} Brother Wi-Fi Direct에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother Wi-Fi Direct 24 페이지.
페이지 인쇄
Configuration methods
One push configuration using WPS (Wi-Fi Protected Setup)
If your mobile device supports WPS (PBC; Push Button Configuration), you can configure a Wi-Fi Direct
network by following these instructions.
a
Press
.
b
Press Wi-Fi Direct.
c
Swipe up or down, or press a or b to display Group Owner.
Press Group Owner and then press On.
d
Swipe up or down, or press a or b to display Push Button.
Press Push Button.
e
When Wi-Fi Direct On? is displayed, press On to accept.
To cancel, press Off.
f
When Activate Wi-Fi Direct on other device. Then Press [OK]. is displayed, activate
your mobile device's WPS one push configuration method (see your mobile device's user's guide for
instructions) and then press OK on your Brother machine. This will start the Wi-Fi Direct setup.
To cancel, press
g
If your mobile device connects successfully, the machine shows Connected.
You have completed the Wi-Fi Direct network setup. For details on printing from or scanning to your
mobile device, download the Mobile Print/Scan Guide for Brother iPrint&Scan or the AirPrint Guide from
the Brother Solutions Center (http://solutions.brother.com/).
If the connection fails, see Troubleshooting on page 16.
.
2
2
12