Brother Wi-Fi Direct 매뉴얼 - 페이지 23

{카테고리_이름} Brother Wi-Fi Direct에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother Wi-Fi Direct 24 페이지.

Glossary

I/F Enable

If you want to use the Wi-Fi Direct network connection, set I/F Enable to On.



WPA2-PSK

Enables a Wi-Fi Protected Access™ Pre-shared key (WPA-PSK/WPA2-PSK), which enables the Brother

wireless machine to associate with access points using TKIP for WPA-PSK or AES for WPA-PSK and

WPA2-PSK (WPA-Personal).



AES

Advanced Encryption Standard (AES) provides stronger data protection by using a symmetric-key

encryption.



WPA2 with AES

Uses a Pre-Shared Key (PSK) that is 8 or more characters in length, up to a maximum of 63 characters.



SSID

Each wireless network has its own unique network name and it is technically referred to as the Service Set

Identification (SSID). The SSID is a 32-byte or less value and is assigned to the access point. The wireless

network devices you want to associate to the wireless network should match the access point. The access

point and wireless network devices regularly send wireless packets (referred to as beacons) which have

the SSID information. When your wireless network device receives a beacon, you can identify wireless

networks that are close enough to connect to.