Brother ADS-2600W 빠른 설정 매뉴얼 - 페이지 24

{카테고리_이름} Brother ADS-2600W에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother ADS-2600W 37 페이지. Web connect guide - english
Brother ADS-2600W에 대해서도 마찬가지입니다: 매뉴얼 (20 페이지), 제품 안전 매뉴얼 (20 페이지), 빠른 설정 매뉴얼 (23 페이지)

페이지 인쇄

For Wireless Network Users

One-push setup using

WPS or AOSS™

(Windows

Confirm your wireless access point/router has

the WPS or AOSS™ symbol as shown below.

Place the Brother machine within range of your

WPS or AOSS™ access point/router. The

range may differ depending on your

environment. Refer to the instructions provided

with your access point/router.

Press

Swipe up or down, or press a or b to display

Network, and then press Network.

Swipe up or down, or press a or b to display

WLAN, and then press WLAN.

Swipe up or down, or press a or b to display

WPS/AOSS, and then press WPS/AOSS.

When Enable WLAN? is displayed, press Yes

to accept.

Note

If your wireless access point/router supports WPS

(PIN Method), you can also configure your

machine using the PIN (Personal Identification

Number) Method. uuNetwork User's Guide:

Configuration using the PIN Method of WPS

(Wi-Fi Protected Setup)

When the LCD shows to start WPS or AOSS™,

press the WPS or AOSS™ button on your

wireless access point/router. See the user's

guide of your wireless access point/router for

instructions.

Then press OK and your machine will now

automatically detect which mode (WPS or

AOSS™) your wireless access point/router

uses and try to connect to your wireless

network.

& Macintosh)

A connection result message appears until the

OK button is pressed on the LCD.

If your wireless device is connected

successfully, the LCD shows Connected.

If the connection failed, the LCD shows an

error code. Make a note of the error code, see

Troubleshooting on page 25, and correct the

error.

Wireless setup is now complete. A four

level indicator at the top of your

machine's LCD will show the wireless

signal strength of your access

point/router.

To install MFL-Pro Suite, continue to

step 11.

For Windows

users:

Now go to

Page 28

For Macintosh users:

Now go to

Page 31