Brother ADS-4900W 빠른 시작 매뉴얼 - 페이지 2

{카테고리_이름} Brother ADS-4900W에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother ADS-4900W 10 페이지.
Brother ADS-4900W에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (11 페이지), 빠른 시작 매뉴얼 (11 페이지)

페이지 인쇄

Connect your machine and install software

Select your preferred scanning method and choose your connection method.

Using your machine with your computer or mobile device

Visit

setup.brother.com

install Brother software.

setup.brother.com

For Mac: Visit

support.brother.com/mac

download Brother software.

Using your machine as a standalone device (ADS-4300N/ADS-4500W/ADS-4700W/

ADS-4900W only)

Connect your machine to your network using a network cable (purchased separately) or via Wi-Fi

You can set up your Wi-Fi connection either using the machine's control panel or using your computer.

Manual Wireless Setup (ADS-4500W/ADS-4700W/ADS-4900W only)

If you do not have a computer connected to the network or if you cannot connect your machine using your computer, try to set up the

connection manually.

> [Find Wi-Fi

1. Press

Network] > [Yes].

2. Select the SSID (Network

Name).

Enter the Network key

(Password).

NOTE

If setup is not successful, visit support.brother.com for FAQs, Troubleshooting, and manuals.

LED Indications (ADS-4100/ADS-4300N only)

Off

Lit

Blinking

For more information about troubleshooting your machine, see the Online User's Guide.

to download and

When the wireless setup is

successful, the LCD displays

[Connected].

If you cannot find your SSID or

Network key, ask your network

administrator or wireless access

point/router manufacturer.

Machine Status

Ready

(Blinking slowly)

Sleep

Follow the on-screen

instructions to continue

installation.

For Mobile Devices:

• Set up the connection

manually.

• You can also connect

to your machine if it is

connected to your router/

access point using a

network cable (purchased

separately). For more

information, see the Online

User's Guide.

NOTE

• If setup is not successful, restart your machine

• If using a computer, go back to

Error Status

• Document Jam

• Document Pick Up Error

• Front Cover Open

• Multifeed Detection Error

(ADS-4300N only)

• Access Error

Finish

When finished, restart your computer.

• To check for the latest firmware, visit

support.brother.com/up7.

• If not successful, try to set up the

connection manually.

For detailed scanning instructions,

see the Online User's Guide at

support.brother.com/manuals.

and the wireless access point/router, and then

repeat these steps.

software.

• Scheduled Maintenance

Notification

• Pick Up Roller

Replacement Notification

to install