Fujitsu PenCentra 130 사용자 지침
{카테고리_이름} Fujitsu PenCentra 130에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu PenCentra 130 1 페이지. Hd portable accessories
Fujitsu PenCentra 130에 대해서도 마찬가지입니다: 사용자 설명서 (2 페이지), 사용자 설명서 (8 페이지), 설치 지침 (1 페이지), 사용자 설명서 (2 페이지), 사용자 지침 (1 페이지), 사용자 지침 (1 페이지), 사용자 지침 (2 페이지), 데이터시트 (3 페이지)
페이지 인쇄
FMWDS4
Compact Desk Stand
User's Instructions
PenCentra 130, PenCentra 200,
Stylistic LT
The Compact Desk Stand is a compact,
adjustable device for supporting your
PenCentra 130, PenCentra 200, or Stylistic
LT pen tablet.
The desk stand consists of four primary
parts, as illustrated in Figure 1:
• Left Leg Assembly
• Right Leg Assembly
• Platform
• Adjustment Cam
The desk stand is shipped flat and fully
assembled in a storage pouch. To open the
stand, unfold the leg assemblies so that they
resemble Figure 1. The desk stand can now
be used on a flat, stable surface, such as a
desktop.
Using the Desk Stand
Place the pen tablet in the desk stand so that
the bottom of the tablet is centered in the
J-shaped sections of the leg assemblies.
The adjustment cam allows you to change
the viewing position of the pen tablet
screen. To adjust the viewing angle, turn the
cam around the shaft on which it is
mounted, as shown in Figure 2. Depending
on the position of the cam, the vertical
position of the screen varies. Experiment
with the adjustment cam until you find an
acceptable position.
When the stand is not in use, fold it flat and
store it in the storage pouch.
PenCentra 130, PenCentra 200, and Stylistic LT are trademarks of Fujitsu PC Corporation. © 2000 Fujitsu PC Corporation
6/00
0
Left Leg Assembly
Figure 1. Compact Desk Stand
0
Page 1 of 1
Platform
Figure 2. Adjustment Cam
Adjustment Cam
Right Leg
Assembly
58-0665-00B