Fujitsu Point 510 사용자 설명서 - 페이지 29

{카테고리_이름} Fujitsu Point 510에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu Point 510 40 페이지. Pen tablet
Fujitsu Point 510에 대해서도 마찬가지입니다: 제품 참조 (2 페이지)

페이지 인쇄

Here is a description of each connector on the Point 510 pen tablet:

PC Card slot

Keyboard port

9-pin serial port

External

headphones

External

microphone

High-usage

contacts

IrDA port

(serial port B)

System interface

connector

Optional Wireless RF LAN Transceiver

The Point 510 pen tablet can be equipped with an optional radio frequency (RF)

transceiver and antenna that allow you to send and receive data from a centralized

computer on a wireless, local area network (LAN). Point 510 pen tablets equipped

with the wireless RF LAN transceiver have an RF antenna mounted on the pen tablet

to transmit and receive the signals (antenna shown on page 2-12).

Allows you to use a PC Card with the Point 510 pen tablet.

To remove a PC Card, press the eject button inside the PC

Card door.

Allows you to connect a Fujitsu low-power 3.3-volt

keyboard, and most other PS/2-style 5-volt keyboards.

This is a fully functional RS232-C serial port. Allows you to

connect a modem, or any other external device with a

serial interface.

Stereo mini-jack for headphones.

Mono mini-jack for a microphone.

Eleven metal contacts that correspond to "pogo pins"

(springy metal connectors) on certain cradles. These allow

for quick, reliable connect and disconnect of the Point 510

pen tablet many times during the work day.

Infrared serial port (IrDA1.0 standard) located between the

High-Usage contacts and the System Interface connector.

An infrared transceiver built into the system unit allows you

to communicate with another device such as a printer

equipped with an IrDA port. The effective range for infrared

communication is about 3 feet (1meter). To transmit and

receive data using this port, you must provide a clear,

line-of-sight path between the Point 510 pen tablet IrDA

port and the IrDA transceiver on the other device.

A 120-pin connector that allows you to connect the Point

510 pen tablet to a peripheral cradle when quick connect

and disconnect is not necessary. The pins provide

connections to equipment such as printers.

Optional Wireless RF LAN Transceiver

2-13