Brother DCP-J132W 사용자 설명서 - 페이지 17

{카테고리_이름} Brother DCP-J132W에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP-J132W 48 페이지. Dcp-j132w
Brother DCP-J132W에 대해서도 마찬가지입니다: 사용자 설명서 (44 페이지), 빠른 시작 매뉴얼 (31 페이지), 자주 묻는 질문 (2 페이지)

페이지 인쇄

Windows

Operation

CALIBRATION

Note

• Calibration is critical because it allows the image quality to be "balanced" for your computer and scanner

combination. If you switch the computer that you use with your scanner or change scanners, you must

re-calibrate.

• Calibration can be performed on any TWAIN-compliant application. The DSmobileSCAN II is such an

application.

• When you intend to scan with a WIA compliant scanner driver, please conduct the calibration process with

a TWAIN compliant scanner driver beforehand.

To open the DSmobileSCAN II application, you can either double-click the DSmobileSCAN II shortcut

icon on your desktop

Windows

Desktop.

Once you have launched DSmobileSCAN II (or any TWAIN application), select the Scan button and the

step-by-step calibration instructions will appear in a succession of prompts.

This calibration process uses the special black and white calibration sheet (see picture on page iv) that was

included with your scanner. When calibrating, note the direction of the arrows for proper insertion.

When the calibration process has been completed successfully, you will see the message above; otherwise

you will need to re-calibrate the scanner.



If you switch scanners or your image quality has become unsatisfactory, you can re-calibrate your scanner

by choosing the Custom button in the DSmobileSCAN II window and select the Calibrate button.

or the "Taskbar tray" icon usually in the lower right-hand corner of the