Brother DCP-J132W 사용자 설명서 - 페이지 20

{카테고리_이름} Brother DCP-J132W에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP-J132W 44 페이지. Dcp-j132w
Brother DCP-J132W에 대해서도 마찬가지입니다: 사용자 설명서 (48 페이지), 빠른 시작 매뉴얼 (31 페이지), 자주 묻는 질문 (2 페이지)

페이지 인쇄

Dialling and storing numbers

(MFC model)

Voice operations

You can use your extension or external

telephone to dial voice calls.

BT Call Sign (U.K. only)

This feature of the machine lets you use the

BT Call Sign subscriber service which allows

you to have at least two separate telephone

numbers on one telephone line. Each

telephone number has its own distinctive

ringing pattern, so you know which telephone

number is ringing. This is one way you can

have a separate telephone number for your

machine.

Your machine has a BT Call Sign compatible

distinctive ringing function, allowing you to

dedicate a second telephone number (on the

same telephone line) just for receiving faxes.

NOTE

• You can switch BT Call Sign off

temporarily, then turn it back on. When

you get a new fax number, make sure you

reset this function. This machine will

automatically answer incoming calls that

use your new fax number.

• When you set the BT Call Sign feature to

On, the receive mode is set to Manual

automatically. Manual mode will not

respond to incoming telephone calls,

since the number you use for telephone

calls will use the normal ring pattern.

To enable the machine to work with BT

Call Sign (with your external

telephone only)

Press Menu 3, 0, 2.

Press a or b to choose On (or Off).

Press OK.

Press Stop/Exit.

NOTE

If you turn off BT Call Sign, the receive

mode stays in Manual. You will need to

set receive mode again. (See Basic

User's Guide: Choose the Receive Mode.)