Fujitsu Stylistic 3500 설치 매뉴얼 - 페이지 3

{카테고리_이름} Fujitsu Stylistic 3500에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu Stylistic 3500 4 페이지. Portfolio case for use with stylistic 3400 and 3500 pen tablets
Fujitsu Stylistic 3500에 대해서도 마찬가지입니다: 설치 및 사용자 설명서 (8 페이지)

페이지 인쇄

58_0497_02.fm Page 3 Tuesday, July 10, 2001 2:18 PM

INSTALLING THE RADIO ANTENNA COVER

To attach the radio antenna cover to the pen tablet PC,

perform the following steps.

1. Position the antenna cover in relation to the back of the

pen tablet PC as shown in Figure 2.

2. If caps are present over the mounting holes, remove

them with a small screwdriver, or similar tool.

3. If the FMW42CR2 antenna cover is being used, slide the

open slot in the cover (as outlined in Figure 2) over the

antenna so that the antenna protrudes from the cover.

4. Insert the antenna cover tabs into the two tab slots on

the pen tablet.

Note: If the screws referenced in the step below are either lost or

missing, they can be purchased at most hardware stores (Cross-recessed

head Machine Screw with spring washer and flat washer. Size: M2.5 x

8 mm long. Finish:Black Zinc)

5. Insert the two black screws through the holes in the

hood and secure them to the pen tablet.

Tab Slots

Antenna Slot

(FMW42RC2

model only)

Figure 2. Installing the Radio Antenna Cover

Mounting

Hole

Tab

PC Card Slot