Brother DSmobile 820W 빠른 설정 매뉴얼 - 페이지 5
{카테고리_이름} Brother DSmobile 820W에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DSmobile 820W 6 페이지.
Brother DSmobile 820W에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (6 페이지)
페이지 인쇄
WARNING
Do not spill drinks, or water on the device. Do not use the device
in places where water may splash the device. This may result in
igniting a fire, electric shock, or device failure. In such an event
turn the power switch off immediately, remove the USB cable from
the outlet. Contact the store where this unit was purchased.
Keep plastic bags bundled out of the reach of children or throw
them away to avoid the danger of suffocation.
Do not place near open flames or heater. This may result in a fire
or device failure.
CAUTION
Strong jolts, i.e. being dropped, being stepped on, etc., may
damage the unit. This may result in injury. In the event that the
unit is damaged, turn the power switch off immediately, remove
the USB cable from the outlet. Contact the store where this unit
was purchased.
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
Do not locate the device on rackety or sloping tables. Do not
locate the device on an unstable surface. The device may fall
down and result in injury.
Do not place heavy objects on the unit. It may cause unbalance
and the device may fall down. This may result in injury.
Do not use an organic solvent, i.e. flammable gas, alcohol, etc.,
when cleaning the device. Do not use them near the device.
This may result in a fire or device failure.
IMPORTANT
Do not leave the device at places exposed to direct sunlight and
places near open flames or heater with extremely high or low
temperature. Do not use and store the device in locations of much
humidity and dust.
Do not conduct any operations not instructed in this guide. This
may result in injury or device failure.
Do not use an organic solvents, i.e. paint thinner, benzene,
alcohol, etc., when cleaning the unit. This may damage the finish
on the surface or may peel the paint resulting in damage. Wipe
away any dirt on the unit using a soft, dry cloth.
Do not use any USB cables except the USB cable supplied with
the machine.
Do not use the device in locations where temperature changes
are extreme. The resulting condensation may result in device
failure or malfunction. In the event of condensation, use only after
drying the device naturally.
Rechargeable Li-ion battery
• At the time of purchase, the rechargeable Li-ion battery is slightly
charged so that the operation of the scanner can be verified; however,
the rechargeable Li-ion battery should be fully charged via the USB port
before the scanner is used.
• If the scanner will not be used for a long period of time, remove the
rechargeable Li-ion battery from the scanner, and then store it in a
location where it is not exposed to static electricity, high humidity,
or high temperatures (temperatures between 15 and 25 °C and
40 to 60% humidity are recommended). In order to maintain the
efficiency and life of the Li-ion rechargeable battery, charge it at
least every six months.
• If you notice anything unusual about the rechargeable Li-ion battery the
first time it is used, for example overheating or rust, DO NOT continue
to use the battery. Contact Brother customer service.
Tips on using the rechargeable Li-ion
battery
• Charge the rechargeable Li-ion battery before use. Do not use it before
it is charged.
• The rechargeable Li-ion battery charging can take place in 5~35 °C
environments. Charge the rechargeable Li-ion battery in an
environment in this temperature range. If the surrounding temperature
is out of this range, the rechargeable Li-ion battery will not be charged,
and the battery indicator will remain lit.
• If the scanner is used when both the rechargeable Li-ion battery is
installed and the scanner is connected to your computer, the battery
indicator may turn off and charging may stop even if the rechargeable
Li-ion battery has not been fully charged.
Rechargeable Li-ion battery
characteristics
Understanding the properties of the rechargeable Li-ion battery will allow you
to optimize its usage.
• Using or storing the rechargeable Li-ion battery in a location exposed to
high or low temperatures may accelerate its deterioration. In particular,
using a rechargeable Li-ion battery with a high charge (90% or more) in
a location exposed to high temperatures will considerably accelerate
battery deterioration.
• Using the scanner while the rechargeable Li-ion battery is installed and
charging may accelerate the battery's deterioration. If using the
scanner when the rechargeable Li-ion battery is installed, disconnect
the USB cable.
• If the scanner will not be used for longer than one month, remove the
rechargeable Li-ion battery from the scanner when its charge is 50% or
less, and then store the battery in a cool place away from direct
sunlight.
• If the rechargeable Li-ion battery will not be used for a long period of
time, we recommend charging it every 6 months.
• If you touch a part of the scanner while the Li-ion battery is charging,
that part of the scanner may feel warm. This is normal, and the scanner
may be used safely. If the scanner becomes extremely hot,
discontinue use.
Surroundings temperature range
Charge
Standard discharge current 0.36 A
Maximum discharge current 1.7 A
Less than 1 month
Shipped battery
Less than 3 month
Less than 1 year
Charging parameters
Maximum charging voltage
Maximum charging current
0~45 °C
-20~60 °C
-20~60 °C
-20~55 °C
-10~45 °C
0~25 °C
4.2 Vdc
1700 mA
5