Fujitsu Stylistic LT 800P 사용자 설명서 - 페이지 2

{카테고리_이름} Fujitsu Stylistic LT 800P에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu Stylistic LT 800P 2 페이지. Mini-dock stylistic lt series
Fujitsu Stylistic LT 800P에 대해서도 마찬가지입니다: 설치 매뉴얼 (4 페이지), 설치 지침 (1 페이지)

페이지 인쇄

The viewing angle of the mini-dock can be adjusted

to four different positions. The bottom of the support

bail on the rear of the support platform (see Figure

3). snaps into one of four slots. When storing the

mini-dock, flip the bail up against the back of the

support platform to allow the platform to lie flat.

Figure 2. Right Side of Mini-Dock

Support

Bail

Parallel

Port

Serial Port

Video Port

Figure 3. Rear and Left-Side of Mini-Dock

8/00

AC Adapter

Port

PS/2-style

LAN Port

Mouse Port

Support

Platform

PS/2-style

Keyboard

Port

USB

Floppy Disk

Port

Drive Port

Page 2 of 2

Installing the System into the Mini-Dock

Cautions

• Dropping conductive material onto the charging contacts

could result in internal damage to the pen tablet circuitry.

• Prior to installing your pen tablet into the mini-dock, be

sure to power down your system first. Failure to do so

could result in damage to the system or the mini-dock.

1. Shut down the system by selecting Start> Shut

Down> Shut Down.

2. Position the pen tablet against the positioning

guide and the back of the mini-dock.

3. Slide the pen tablet into the tray at the bottom of

the mini-dock and press it down firmly until it is

seated, as shown in Figure 4. The alignment guide

in the bottom of the tray ensures that the system is

properly seated over the connector.

4. Re-start your system.

Positioning

Guide

Mini-Dock

Base

Figure 4. Installing the System in the Mini-Dock

Removing the System from the Mini-Dock

1. Shut down the system by selecting Start> Shut

Down> Shut Down.

2. While holding the base of the mini-dock with one

hand, grasp the pen tablet at the top and firmly pull

it straight up from the base.

3. Restart your system.

Pen Tablet

Mini-Dock

58-0737-00B