Brother ImageCenter ADS-2400N 제품 안전 매뉴얼 - 페이지 15
{카테고리_이름} Brother ImageCenter ADS-2400N에 대한 제품 안전 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother ImageCenter ADS-2400N 17 페이지.
페이지 인쇄
Product Safety Guide
Notice Regarding the Faithful Reproduction of Scanned
Documents
After scanning a document, confirm that the accuracy and quality of the corresponding scan
data meets your needs by confirming the size of the scan data, the amount of image data
captured, image fidelity, colour tones, etc.
Always confirm the scan data before destroying the original document.
It is possible that a portion of the scan data may be lost or damaged, therefore, read all
instructions carefully and keep the following in mind:
Depending on the condition of the document, the document may become worn thin, distorted,
dirty, or cracked during scanning. In this case, some or all of the scan data may be lost.
Confirm that the document has no wrinkles, bends, or holes.
If the inside of the machine is dirty, the document may become worn thin, distorted, dirty,
or cracked during scanning. In this case, some or all of the scan data may be lost.
Clean the inside of the machine carefully and regularly.
The following may occur depending on the scan settings, such as document size, scanning
resolution, colour-related settings, single-side or double-side scanning settings, auto
deskew, blank page skip, etc:
• Text may be illegible or unclear if image resolution is too low.
• Scan data of a colour document may be captured in black-and-white.
• Only one side of a two-sided document may be captured.
• A portion of the document may not be scanned, or the size may be too small.
• The document may only be scanned up to a certain point, after which scan data will be lost.
• Blank pages may not be deleted, or pages may be deleted unnecessarily.
• Margins may be added to the edges of the scan data.
Refer to the User's Guide for information about how to configure the scan settings.
Depending on the condition of the document (such as if it has wrinkles, bends, or holes) and
consumables, multiple pages of a document may be fed at once, causing some pages to be
missing from the scanned data.
Confirm that the document has no wrinkles, bends, or holes.
Replace all consumables periodically.
When scanning documents that are not within the recommended guidelines, or depending
on the condition of the document (such as if it has wrinkles, bends, or holes), consumables,
or the paper feeding mechanisms inside the machine, documents may become jammed
inside the machine during scanning. In this case, some or all of the scan data may be lost.
(Documents may be destroyed as a result of a paper jam.)
Refer to "Acceptable Documents" in the User's Guide for information about acceptable
documents.
When scanning documents that have been marked with a fluorescent marker, marked areas
may not be seen correctly in the scan data, or the marker colour may not be reproduced
correctly, depending on the colour and density of the marker ink.
You may achieve more desireable results by increasing the scanning resolution. Refer to the
User's Guide for information about resolution settings.
15