Brother MFC-J245 사용자 설명서 - 페이지 22

{카테고리_이름} Brother MFC-J245에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC-J245 47 페이지.
Brother MFC-J245에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (20 페이지), 사용자 설명서 (48 페이지), 사용자 설명서 (44 페이지), 빠른 설정 매뉴얼 (21 페이지)

페이지 인쇄

Chapter 5

Converting telephone wall outlets

There are three ways to convert to an RJ11

jack. The first two ways may require help from

the telephone company. You can change the

wall outlets from one RJ14 jack to two RJ11

jacks. Or, you can have an RJ11 wall outlet

installed and slave or jump one of the

telephone numbers to it.

The third way is the easiest: Buy a triplex

adapter. You can plug a triplex adapter into

an RJ14 outlet. It separates the wires into two

separate RJ11 jacks (Line 1, Line 2) and a

third RJ14 jack (Lines 1 and 2). If your

machine is on Line 1, plug the machine into

L1 of the triplex adapter. If your machine is on

Line 2, plug it into L2 of the triplex adapter.

Triplex Adapter

RJ14

RJ11

RJ14

Installing machine, external two-line

TAD and two-line telephone

When you are installing an external two-line

telephone answering device (TAD) and a

two-line telephone, your machine must be

isolated on one line at both the wall jack and

at the TAD. The most common connection is

to put the machine on Line 2, which is

explained in the following steps. The back of

the two-line TAD must have two telephone

jacks: one labeled L1 or L1/L2, and the other

labeled L2. You will need at least three

telephone line cords: the one that came with

your machine and two for your external two-

line TAD. You will need a fourth line cord if

you add a two-line telephone.

Put the two-line TAD and the two-line

telephone next to your machine.

Plug one end of the telephone line cord

for your machine into the L2 jack of the

triplex adapter. Plug the other end into

the LINE jack inside the machine.

Plug one end of the first telephone line

cord for your TAD into the L1 jack of the

triplex adapter. Plug the other end into

the L1 or L1/L2 jack of the two-line TAD.

Plug one end of the second telephone

line cord for your TAD into the L2 jack of

the two-line TAD. Plug the other end into

the EXT. jack inside the machine.

1 Triplex Adapter

2 Two-Line Telephone

3 External Two-Line TAD

4 Machine

Your additional two-line telephones on other

wall outlets do not require adapters. There

are two ways to add a two-line telephone to

the machine's wall outlet. You can plug the

telephone line cord from the two-line

telephone into the L1+L2 jack of the triplex

adapter. Or, you can plug the two-line

telephone into the TEL jack of the two-line

TAD.