AC Schnitzer DKG 피팅 지침 매뉴얼 - 페이지 13

{카테고리_이름} AC Schnitzer DKG에 대한 피팅 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AC Schnitzer DKG 16 페이지. Aluminium pedal set

F it t in g In s t r u c t io n s

AC Schnitzer – Aluminium Pedal Set –

2. Fitting .... (cont'd.)

Fig. 4

On RHD vehicles (not automatic), insert the metric

countersunk head bolts Ø 3x16mm supplied in the

upper fixing points, apply the hex nuts M3 and wash-

ers U3 supplied, from behind, and tighten. At the low-

er fixing points of the AC Schnitzer aluminium pedals,

attach the backing plate supplied and tighten with the

Ø 3x16mm metric bolt supplied so that the standard

pedal is clamped between the backing plate and the

AC Schnitzer aluminium pedal.

Fig. 5

Thoroughly clean the contact face of the standard gas pe-

dal with a suitable cleaner, e.g. brake cleaner.

Fitting Instructions No.: 3520 10 (20) 110-120-130-310 / Issue: 26.06.2017/ TSch / REV01

AC Schnitzer - Neuenhofstraße 160 - D - 52078 Aachen - Tel. 0241/5688 -130 Fax -135 / www.ac-schnitzer.de