Fujitsu T4215 - LifeBook Tablet PC 바이오스 매뉴얼 - 페이지 7
{카테고리_이름} Fujitsu T4215 - LifeBook Tablet PC에 대한 바이오스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu T4215 - LifeBook Tablet PC 33 페이지. Lifebook t series
Fujitsu T4215 - LifeBook Tablet PC에 대해서도 마찬가지입니다: 사용자 설명서 (13 페이지), 사용자 설명서 부록 (2 페이지)
페이지 인쇄
Drive1 Submenu of the Main Menu
The Drive1 submenu allows you to configure secondary ATA devices.
Note that actual hard drive label shown may vary. Depending on the drive type, information such as cylinders, heads
and sectors may also be displayed.
Main
Primary Master [MATSHITADVD-RAM UJ-840S]
Type:
Multi-Sector Transfers:
LBA Mode Control:
Transfer Mode:
Ultra DMA Mode:
F1
Help
ESC
Exit
Table 3: Fields, Options and Defaults for the Drive1 Submenu of the Main Menu
Menu Field
Options
Type:
• Auto
• None
Multi-Sector
• Disabled
• 2 Sectors
Transfers:
• 4 Sectors
• 8 Sectors
• 16 Sectors
LBA Mode
• Disabled
• Enabled
Control:
PhoenixBIOS Setup Utility
[Auto]
[Disabled]
[Disabled]
[Standard]
[Disabled]
Select Item
-/Space
Change Values
Select Menu
Enter
Select
Figure 3. Drive1 Submenu
Default
Description
[Auto]
NOTE: The Type field does not appear as a drop-down menu. Tap the
spacebar to toggle the selections.
Selects the ATA/ATAPI device type. Select Auto to have the type automati-
cally identified by the BIOS at POST. If None is selected, all of the following
setup items do not appear.
[Disabled]
The best option is selected by the BIOS automatically when Auto is
selected and cannot be selected by the user. Specifies the number of
sectors per block for multiple sector transfer.
[Disabled]
The best option is selected by the BIOS automatically when Auto is
selected and cannot be selected by the user. Enables or disables Logical
Block Addressing in place of Cylinder, Head, Sector addressing.
7
M a i n M e n u
Item Specific Help
Select Serial ATA/IDE
drive installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
[None]
The drive is disabled.
F9
Setup Defaults
Sub-Menu
F10
Save and Exit