Fujitsu 8FX MB2146-510-01-E 설정 매뉴얼 - 페이지 18

{카테고리_이름} Fujitsu 8FX MB2146-510-01-E에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu 8FX MB2146-510-01-E 26 페이지. 8-bit microcontroller mb95560h/570h/580h series starter kit

페이지 인쇄
Fujitsu 8FX MB2146-510-01-E 설정 매뉴얼

3.4.7 Key Module

Key S1 and key S2 are provided to demonstrate an external interrupt function. Enable these two keys
by the following table.
Key S1 is connected to external Int7, and key S2 is connected to external Int6.
Key:
S1, S2
3.4.8 Lin-UART Module
Lin-UART module can be configured as a LIN or an UART module. Enable each module by the fol-
lowing table.
The UART module features an RS232 transceiver and a standard DB9 interface with PC.
Lin module enables an easy setup of Master/Slave communication by a Lin bus.
UART
LIN*
* : LIN module is optional; contact your local distributor for the EV-board with a LIN module.
14
Modules
Header name
SW2: S1, S2
Modules
Header name
SW2: SOT, SIN
J5: UART
J6: UART
SW2:
SCK, SOT, SIN
J5: LIN
J6: LIN
Table 7 SW2 Key Setting
SW2
LED3
Table 8 UART Setting
SW2
LED3
SW2
LED3
Settings
VR3
VR1
SCK SOT SIN
ADC
LIN UART
Settings
VR3
VR1
SCK SOT SIN
ADC
LIN UART
RX
UART
LIN
J5
J6
LIN
UART
TX
VR3
VR1
SCK SOT SIN
ADC
LIN UART
RX
UART
LIN
J5
J6
LIN
UART
TX
LED2 S2 S1
KEY
LED2 S2 S1
KEY
LED2 S2 S1
KEY