Fujitsu 8FX MB2146-510-01-E 설정 매뉴얼 - 페이지 6
{카테고리_이름} Fujitsu 8FX MB2146-510-01-E에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu 8FX MB2146-510-01-E 26 페이지. 8-bit microcontroller mb95560h/570h/580h series starter kit
페이지 인쇄
1.4 Feature
The MB95560H/570H/580H Series starter kit is the best for a performance and functional
evaluation, and a check of operation before including MB95560H/570H/580H Series in a
user's system.
Below, the feature of the BGM debugger for MB95560H/570H/580H Series is shown.
1.5 Hardware Setup
In the hardware setup procedure, you configure and connect the hardware products. This
chapter includes the configuring and connecting procedure for each product in order. Check
the contents and complete the hardware setup.
2
• Microcomputer operation voltage. It corresponds to +2.4V to +5.5V.
(The maximum and minimum of microcomputer operation voltage and frequency of operation
differs with each MCU. refer to the documents (a data sheet, hardware manual, etc.) of each
device relation for the operation voltage and frequency of MCU of operation.)
• Compact development environment, a light and small BGM Adaptor.
• Since a monitor program is performed in exclusive memory space, it does not consume user
memory space.
• Continuation execution, step execution and break correspondence.
• It connects with a host computer by the USB interface.
• Configuring EV-Board
• Connection of each product
- Connecting BGMA and EV-board
- Connecting EV-Board power supply