Fujitsu CREMSON MODULAR STARTERKIT 사용자 설명서 - 페이지 21

{카테고리_이름} Fujitsu CREMSON MODULAR STARTERKIT에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu CREMSON MODULAR STARTERKIT 36 페이지.

Cremson Modular Starterkit

Chapter 5 Flash Programming

5 Flash Programming

Whenever your application has been developed, debugged and tested as explained in the

last chapter, it can be programmed to the internal flash ROM using the „MB91360 Flash

Programmer". This tool is a general flash programming utility, which allows programming the

internal flash ROM without any restrictions given by the starterkit.

The tool „MB91360 Flash Programmer" is a general flash programming tool which does not

take care of the special features of this Starterkit. The tool can be used to program the

debugging kernel (MB91F369 board) or any applications linked for the embedded flash area

directly (without the possibility to have any debugging functions later on). In this case, the

evaluation board will act as a target system only.

CAUTION: Take special care not to write anything to location 0FFEF4, the „security vector".

If you do, you will not be able to re-program the device ever again! See the hardware manual

for details!

Make sure you have installed the Flash Programmer from your CD-ROM. The package

includes the executable (Flashprg.exe) as well as some binary files (Brloadxx.bin) and a

user's guide (Flashprg.pdf).

Figure 3: MB91360 Flash Programmer

- 21 -