Fujitsu D1170 기술 매뉴얼 - 페이지 21

{카테고리_이름} Fujitsu D1170에 대한 기술 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu D1170 22 페이지. Mainboard

Installing network board with WOL

Install the network board as described in the operating manual for your unit.

Push the WOL cable onto the WOL plug connector of the system board.

To use the WOL functionality of a network board the power supply must provide a 5 V

auxiliary voltage of at least 1 A. If the system board was not already incorporated in a

device when you bought it you must check whether your power supply can provide the

auxiliary voltage.

You may find further information in the supplied description of the network board.

Incorrect replacement of the lithium battery may lead to a risk of explosion.

The lithium battery must be replaced with an identical battery or a battery type

recommended by the manufacturer (CR2032).

Do not throw lithium batteries into the household waste. They must be disposed of in

accordance with local regulations concerning special waste.

Ensure that you insert the battery the right way round. The plus pole must be on the top!

Lift the contact (1) a few millimetres and remove the lithium battery from its socket (2).

Insert a new lithium battery of the same type into the socket (3).

A26361-D1170-Z120-5-7419

Add-on modules

English - 13