Fujitsu D1483 기술 매뉴얼 - 페이지 21

{카테고리_이름} Fujitsu D1483에 대한 기술 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu D1483 28 페이지. Mainboard

페이지 인쇄

PCI Bus Resources

PCI Slots

The following table shows an overview of the PCI slots:

PCI slot

PCI IRQ Line X - Assignment of the PCI Interrupts

PCI IRQ Line x defines which ISA interrupts are used for the separate PCI slots.

If you select Auto in the BIOS set up, the interrupts are assigned automatically and no further

settings are required.

Multifunctional PCI boards or boards with an integrated PCI-to-PCI bridge can use several PCI

interrupts (INTA#, INTB#, INTC#, INTD#). Mono-functional PCI boards (default) only use one PCI

interrupt (INTA#) per PCI slot.

The PCI interrupts INTA#, INTB#, INTC# and INTD# are available for every PCI slot.

The same interrupt can be assigned simultaneously to several PCI boards. You should avoid this

condition due to reduced performance.

If you use a setting other than Auto, the Plug & Play functionality of the system BIOS for the

corresponding PCI boards is deactivated.

Auto

The PCI interrupts are assigned automatically in accordance with the Plug & Play

guidelines.

Disabled

No ISA interrupt is assigned to the PCI interrupt.

3, 4, 5, 7, 10, 11, 12, 14, 15

The selected ISA interrupt is assigned to the PCI interrupt. You may not select an

ISA interrupt that is used by a component on the system board (e.g. controller) or an

ISA board.

IRQ

IRQ 0

IRQ 1

IRQ 3

IRQ 4

IRQ 6

IRQ 7

IRQ 8

IRQ 12

IRQ 13

IRQ 14

IRQ 15

A26361-D1483-Z120-1-7619

64bit

Description

64 bit

64 bit PCI bus slot

64 bit

64 bit PCI bus slot

Device

Timer output 0

Keyboard

Serial port 1

Diskette

Printer Port

Real-time clock (RTC)

PS/2 mouse

Numeric processor

Embedded hard disk IDE 1

Interfaces and connectors

Bus frequency

33 MHz / 5 V

English - 13