Fujitsu D1483 기술 매뉴얼 - 페이지 25

{카테고리_이름} Fujitsu D1483에 대한 기술 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu D1483 28 페이지. Mainboard

Upgrading Main Memory

These slots are suitable for 128, 256, 512 and 1024 Mbyte LP DDR memory modules. The board

supports a maximum of 3 Gbytes.

You may only use buffered 3.3 V memory modules. Unbuffered memory modules are not

permitted. You may only use unstacked modules.

LP DDR memory modules must be designed for a clock frequency of 133 MHz (meets

PC2100 specification).

Installing a Memory Module

Push the holders on each side of the memory compartment outwards.

Insert the memory module in the slot while folding the side holders up until the memory module

engages (2).

Removing a Memory Module

Push the clips on the right and left of the compartment outward (1).

Carefully remove the memory module from the compartment (2).

A26361-D1483-Z120-1-7619

Interfaces and connectors

English - 17