Fujitsu D1567 기술 매뉴얼 - 페이지 34
{카테고리_이름} Fujitsu D1567에 대한 기술 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu D1567 47 페이지. Answers2
페이지 인쇄Adding PCI cards
Replacing the lithium battery
In order to permanently save the system information, a lithium battery is installed to provide the
CMOS-memory with a current. A corresponding error message notifies the user when the charge is
too low or the battery is empty. The lithium battery must then be replaced.
Incorrect replacement of the lithium battery may lead to a risk of explosion!
!
The lithium battery may be replaced only with an identical battery or with a type
recommended by the manufacturer.
Do not throw lithium batteries into the household waste. They must be disposed of in
accordance with local regulations concerning special waste.
Make sure that you insert the battery the right way round. The plus pole must be on the top!
The lithium battery holder exists in different designs that function in the same way.
1
►
Press the locking lug in the direction of the arrow; the battery jumps somewhat out of the holder (1).
►
Remove the battery (2).
►
Push the new lithium battery of the identical type into the holder (3) and press it downward until
it engages (4).
24 - English
2
2
4
3
A26361-D1567-Z121-1-6319
3