Fujitsu D1837 기술 매뉴얼 - 페이지 37

{카테고리_이름} Fujitsu D1837에 대한 기술 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu D1837 48 페이지. Siemens

BIOS Recovery - Recovering System BIOS

All BIOS settings are reset to the default values.

►

Open the casing as described in the operating manual.

►

On the mainboard set the jumper to the appropriate setting to restore the system BIOS (see

chapter "Jumper settings").

►

Close the casing as described in the operating manual.

►

Insert a BIOS update floppy disk and start the PC.

►

Note the signals issued from the loudspeaker. You have successfully restored the BIOS if you

hear the signal sequence "short-short- long- long- long" and the diskette access indicator is

dark. This can take a few minutes.

►

Open the casing as described in the operating manual.

►

Restore the switch or jumper settings.

►

Close the casing as described in the operating manual.

►

Remove the floppy disk from the drive.

►

Start the PC and invoke BIOS Setup .

►

Select the menu item Reset Configuration in the menu Advanced and change the setting to Yes .

►

Save the change and terminate BIOS Setup .

The BIOS recovery has now been completed. The system restarts.

Detailed information on the BIOS recovery is contained in the manual "BIOS Setup"

("Drivers & Utilities" CD).

28 - English

A26361-D1837-Z120-1-7419, Edition 1