Fujitsu D2519 기술 매뉴얼 - 페이지 9

{카테고리_이름} Fujitsu D2519에 대한 기술 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu D2519 43 페이지. For rx300 s4

Important notes

Modules with electrostatic-sensitive components

Systems and components that might be damaged by electrostatic discharge

(ESD) are marked with the following label:

Figure 1: ESD label

When you handle components fitted with ESDs, you must observe the following

points under all circumstances:

You must always discharge yourself of static charges (e.g. by touching a

grounded object) before working.

The equipment and tools you use must be free of static charges.

Remove the power plug from the power socket before inserting or removing

boards containing ESDs.

Always hold boards with ESDs by their edges.

Never touch pins or conductors on boards fitted with ESDs.

Use a grounding cable designed for this purpose to connect yourself to the

system unit as you install/deinstall the board.

Place all components on a static-safe base.

You will find a detailed description for handling ESD components in the

relevant European or international standards (EN 61340-5-1,

ANSI/ESD S20.20).

D2519 (RX300 S4)

Technical Manual

Notes on safety