Fujitsu D2530 기술 매뉴얼 - 페이지 8
{카테고리_이름} Fujitsu D2530에 대한 기술 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu D2530 35 페이지. For econel 200 s2
페이지 인쇄
Notes on safety
V
Components can become very hot during operation. Ensure you do
not touch components when making extensions to the system board.
There is a danger of burns!
Transmisson lines to peripheral devices must be adequately shielded.
To the LAN wiring the requirements apply in accordance with the
standards EN 50173 and EN 50174-1/2. As minimum requirement
the use of a protected LAN line of category 5 for 10/100 MBps
Ethernet, and/or of category 5e for Gigabit Ethernet is considered.
The requirements of the specification ISO/IEC 11801 are to be
considered.
Never connect or disconnect data transmission lines during a storm
(lightning hazard).
Batteries
V
CAUTION!
Incorrect replacement of lithium battery may lead to a risk of
explosion. The batteries may only be replaced with identical batteries
or with a type recommended by the manufacturer.
It is essential to observe the instructions in
lithium
battery".
8
Technical Manual
Important notes
chapter "Replacing the
D2530 (Econel 200 S2)