Fujitsu D2619 기술 매뉴얼 - 페이지 33
{카테고리_이름} Fujitsu D2619에 대한 기술 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu D2619 36 페이지. System board d2619 for rx/tx300 s5
페이지 인쇄
Features
3.8
Settings with switches and jumpers
DIP switches
Figure 12: DIP switches
I
Default setting switch 1 to 4 is Off.
Recovering system BIOS - switch 1
Switch 1 enables recovery of the old system BIOS after an attempt to update
has failed. To restore the old system BIOS you need a Flash BIOS medium (see
the BIOS manual or please call our customer service centre).
on
The system boots from the "Flash BIOS medium" (floppy disk, ODD, USB
stick) and reprograms the system BIOS on the board.
off
The System BIOS is started with the system BIOS from the system board
(default setting).
Skipping the password query - switch 2
Switch 2 is used to define whether the password is queried at system startup, if
the password protection is enabled in BIOS Setup (in Security menu, the
Password on boot field must be set to Enabled).
on
The password query is skipped. Passwords are deleted.
off
The password query is effective (default setting).
D2619 (RX/TX300 S5)
Settings with switches and jumpers
ON
1 2 3 4
Technical Manual
33