Fujitsu D2619-N 기술 매뉴얼 - 페이지 25

{카테고리_이름} Fujitsu D2619-N에 대한 기술 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu D2619-N 40 페이지. For primergy rx/tx300 s6

Features

3.2.1.2

Modes of operation

There are three modes of operation for the main memory:

– Independent Channel Mode (maxium population) / Performance Mode

(recommended)

The populated memory of the six channels (A - F) can be used completely.

– Mirrored Channel Mode (maximum security)

Only the populated memory of the two channels A and D can be used. The

channels B and E serve as safeguarding against failure. The memory

belonging to the channels B and E contain the mirrored data of the memory

belonging to channel A and D. The channels C and F are not used.

– Spare Channel Mode (large population and large security)

Only the populated memory of the four channels A, B, D and E can be used.

The channels C and F serve as safeguarding against failure.

Depending on the mode of operation there are different population

requirements for the main memory.

For system relevant information please refer to the configurator of the

server:

http://ts.fujitsu.com/products/standard_server/tower/primergy_tx300s6.html

http://ts.fujitsu.com/products/standard_server/rack/primergy_rx300s6.html

(for the EMEA market)

http://primeserver.fujitsu.com/primergy/system.html

market)

D2619-N (RX/TX300 S6)

Technical Manual

Main memory

(for the Japanese