Fujitsu D2679-B11 기술 매뉴얼 - 페이지 19
{카테고리_이름} Fujitsu D2679-B11에 대한 기술 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu D2679-B11 32 페이지. For tx100 s1
페이지 인쇄
Features
3.4
Screen resolution
Depending on the operating system used the screen resolutions in the following
table refer to the screen controller on the system board. If you are using an
external screen controller, you will find details of supported screen resolutions
in the operating manual or technical manual supplied with the controller.
Screen resolution
640x480
800x600
1024x768
1152x864
1280x1024
3.5
Temperature / system monitoring
Temperature and system monitoring aim to reliably protect the computer
hardware against damage caused by overheating. In addition, any unnecessary
noise is also prevented by reducing the fan speed, and information is provided
about the system status.
The temperature and system monitoring are controlled by an onboard controller.
The following functions are supported:
Temperature monitoring
Measurement of the processor temperature, measurement of the inside temper-
ature by a temperature sensor on the system board, measurement of the
outside temperature by a second onboard temperature sensor.
Fan monitoring
Fans that are no longer available, blocked or sticky fans are detected.
Fan control
The fans are regulated according to temperature.
D2679-B11 (TX100 S1)
Refresh rate (Hz)
200
200
150
120
100
Technical Manual
Screen resolution
Max. number of colors
16.7 Mio.
16.7 Mio.
16.7 Mio.
16.7 Mio.
16.7 Mio.
19