Fujitsu D2861 기술 매뉴얼 - 페이지 27
{카테고리_이름} Fujitsu D2861에 대한 기술 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu D2861 40 페이지. System board for for bx922 s2
페이지 인쇄
Performance features
Performance Channel Mode
In this mode, the maximum performance and capacity can be achieved.
All three channels of a CPU must be populated identically as regards the
size and organization of the memory modules.
The slots within a channel do not have to be populated identically, but the
corresponding slots of all three channels of a CPU must be populated identi-
cally.
Memory modules with different clock frequencies and different speed ratings
can be used within a channel, whereby the settings of the slowest memory
module are used for this channel.
In this mode, symmetrical fitting of the slots of both CPUs is not required.
Slot 0
Channel 2
Slot 1
Slot 0
Channel 1
Slot 1
Slot 0
Channel 0
Slot 1
Channel 0
Channel 1
Channel 2
Figure 6: Fitting in Performance Channel Mode
V
CAUTION!
If only one CPU is installed, the empty DIMM slots must be fitted with
dummy DIMM modules to ensure sufficient cooling of the system (this
does not apply if two CPUs are installed).
D2861 (BX922 S2)
CPU 1
Slot 1
Slot 0
Slot 1
Slot 0
Slot 1
Slot 0
Technical Manual
Main memory
DIMM 1C
3.
DIMM 2C
6.
DIMM 1B
2.
DIMM 2B
5.
DIMM 1A
1.
DIMM 2A
4.
CPU 2
DIMM 2D
DIMM 1D
DIMM 2E
DIMM 1E
DIMM 2F
DIMM 1F
Front side
4.
1.
5.
2.
6.
3.
27