Fujitsu D3030 기술 매뉴얼 - 페이지 14

{카테고리_이름} Fujitsu D3030에 대한 기술 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu D3030 38 페이지. System board for bx920 s2

CE certificate of conformity

Instructions for handling boards

The specific instructions in the service article for the respective end device

must be observed when installing and removing the board.

Disconnect the device plug from the shock-proof socket before carrying out

any work on an installed board.

Exercise extreme care when installing and removing all boards.

Take care not to tilt boards; they must be installed perfectly straight.

If they are incorrectly handled, the boards and the components on them, or

the other components (e.g. EMI spring contacts) and conductors can be

damaged.

Handle all locking mechanisms (engaging lugs and centering pins) carefully

when installing/removing the board or components (e.g. memory modules,

processors).

Never use sharp objects (screwdrivers) as levers.

2.2

CE certificate of conformity

The board complies with the requirements of the EC directives

2004/108/EC regarding "Electromagnetic Compatibility" and

2006/95/EC "Low Voltage Directive". This is indicated by the CE

marking (CE = Communauté Européenne).

Compliance was tested in a typical PRIMERGY configuration.

Technical Manual

D3030 (BX920 S2)