Fujitsu D3030 기술 매뉴얼 - 페이지 34
{카테고리_이름} Fujitsu D3030에 대한 기술 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu D3030 38 페이지. System board for bx920 s2
페이지 인쇄
Settings with switches and jumpers
3.7
Settings with switches and jumpers
DIP switch
Figure 11: DIP switch
I
Default setting switch 1 to 4 = Off.
Switch 1 - NVRAM Clear
Switch 1 specifies whether the BIOS default settings are to be loaded or not.
The BIOS default settings are loaded; the user-defined settings are
on
deleted.
The user-defined settings are retained (default setting).
off
Switch 2 - Clear Password
Switch 2 specifies whether the BIOS password should be requested at system
boot if password protection is activated in the BIOS setup (the Password on boot
field is set to enabled in the SECURITY menu).
on
The password prompt is skipped. The user-defined BIOS passwords are
deleted.
The password prompt is active (default setting).
off
34
ON
1 2 3 4
Technical Manual
D3030 (BX920 S2)