Fujitsu D3049 기술 매뉴얼 - 페이지 33

{카테고리_이름} Fujitsu D3049에 대한 기술 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu D3049 36 페이지. System board for primergy tx140 s1 / tx120 s3

페이지 인쇄
Fujitsu D3049 기술 매뉴얼
3.6.2

Connector panel

Figure 7: Connector panel
No. Description
1
Management LAN connector, for iRMC S3 server management function
2
Shared LAN connector
3
System LAN connector
4
USB connectors
5
Video connector (VGA)
6
Serial connector COM1
7
Global error indicator (orange), CSS indicator (yellow), ID indicator
(blue); (description see preceding section)
The management LAN connector can be set in the BIOS. You will find further
information in the "D3049 BIOS Setup Utility for PRIMERGY TX140 S1 /
TX120 S3" manual.
The serial connector COM1 can be used as default interface or to communicate
with the iRMC S3.
I
The chip set has two integrated USB 2.0 hubs, the Rate Matching Hubs
(RMHs). The bandwidth for USB 1.1 Full Speed Devices for each RMH
is 12 Mbit/s, the bandwidth for High Speed Devices being 480 Mbit/s.
This means that fewer memory accesses are required, thereby placing
the CPU more effectively in low power status.
TX140 S1 / TX120 S3
Technical Manual
Features
33