Fujitsu D3221 매뉴얼 - 페이지 25

{카테고리_이름} Fujitsu D3221에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu D3221 26 페이지. Mainboard

Installing/removing main memory

Technical data

Technology

Total size

Module size

A current list of the memory modules recommended for this mainboard is available

on the Internet at: "http://www.fujitsu.com/fts/products".

At least one memory module must be installed. Memory modules with different

memory capacities can be combined.

Only unbuffered DDR3 memory modules without ECC may be used.

DDR3 memory modules must comply with the PC3-10600 or PC3-12800 speciﬁcation.

If you use more than one memory module, then make sure to distribute the

memory modules over both memory channels. By doing this you use the

performance advantages of the dual-channel mode.

Maximum system performance is achieved when identical memory modules

are used in Channel A and Channel B.

To simplify equipping, the slots are colour coded.

Depending on how the system is conﬁgured, the visible main memory can be reduced.

Channel B, Slot 2

Channel B, Slot 4

Channel A, Slot 1

Channel A, Slot 3

Slot to be used

Channel A, slot 1

Channel B, slot 2

Channel A, slot 3

Channel B, Slot 4

The installation/removal is described in the "Basic information on mainboard" manual.

Fujitsu

DDR3 1333/1600 MHz unbuffered DIMM modules 240 pin; 1.5 V;

64 bit, no ECC

1 to 32 GByte DDR3

1, 2, 4 or 8 GByte per module

Number of memory modules inserted

English - 7