Fujitsu D3222 매뉴얼 - 페이지 24
{카테고리_이름} Fujitsu D3222에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu D3222 26 페이지. Mainboard
![Fujitsu D3222 매뉴얼](/uploads/products/server2/2464501/2464501.jpg)
6 - English
Procedure
The processor socket is covered with a protective cap to protect the spring
contacts In the event of a warranty case, the mainboard can only be taken back
by Fujitsu Technology Solutions with the protective cap secured!
b
Please note that, depending on the heat sink used, different heat sink
mounts are required on the mainboard.
► Depending on the configuration variant, you must pull a protective foil off the heat sink
or coat the heat sink with heat conducting paste before fitting it.
► Secure the heat sink - depending on the model - with four screws or push it into the mounts.
20
b
a
Installing/removing the processor
► Remove the heat sink.
► Press down the lever and unhook it.
► Fold up the frame.
► Hold the processor between your thumb
and index finger and insert it into the socket
(b) so that the marking of the processor is
aligned with the marking on the socket (a).
► Press the lever downward until it is
hooked in again.
► Remove the protective cap and keep it.
Fujitsu