Fujitsu D3654-B 조립 지침 매뉴얼 - 페이지 5

{카테고리_이름} Fujitsu D3654-B에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu D3654-B 12 페이지.
Fujitsu D3654-B에 대해서도 마찬가지입니다: 짧은 설명 (29 페이지)

페이지 인쇄

Assembly Instructions

SMARTCASE S520

WLAN module / M.2. module assembly

First remove the M.2 mounting screws.

Insert M.2 modules

angular

Both modules, as shown in the picture, have to be touched on the outside edges only.

For the M.2 Key M SSD and M.2 Key E WLAN/BT, the assembly nuts and screws are pre-installed.

Recommended torque for the M.2 screw is 0.2Nm, and 0.3Nm for the nut.

Processor assembly

First open the CPU socket and remove the socket protection. Then insert the CPU. Consider the mechanical coding of

the CPU. After installing the CPU close the socket carefully.

__________________________________________________________________________________________________________________________________________________________

Page 5 of 12

2280 screw /

nut position

into the

socket

(while paying attention to the coding /

V1.1 - 07/2019

2230 screw / nut

position

notch).

Pay attention

to the notch