Fujitsu F2MC-16L Series 애플리케이션 노트 - 페이지 11
{카테고리_이름} Fujitsu F2MC-16L Series에 대한 애플리케이션 노트을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu F2MC-16L Series 23 페이지.
Fujitsu F2MC-16L Series에 대해서도 마찬가지입니다: 운영 매뉴얼 (26 페이지)
페이지 인쇄
Change odd page title here
Chapter 2 Hardware Installation
2.2.2 Supply of Clocks to the evaluation Chip
2.3.2.1 Configuration of Main Clock Supply
In case a crystal is used for the clock supply, it is highly recommended to use the crystals
mounted on the emulator system. Otherwise clocks might not work correctly.
The mounting of the main crystal is done in SC4 and is shown in the next figure. For the
capacitors mostly 22pF or 33pF are preferred values.
Figure 2.3.2.1.1 Crystal Mounting Example
To define the usage of the main and sub-clock pins the settings of SW3 and S7 must be
checked. The following schematic show the crystal peripheral circuit.
Figure 2.3.2.1.2 Crystal Peripheral Circuit
© Fujitsu Microelectronics Europe GmbH
- 11 -
MCU-AN-390077-E-V11