Fujitsu Flash-64P-M01 매뉴얼 - 페이지 6

{카테고리_이름} Fujitsu Flash-64P-M01에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu Flash-64P-M01 21 페이지.

1. Hardware description

The Flash-64P-M01/M09 is a low cost multifunctional evaluation board for the

Fujitsu 16-Bit Flash microcontroller series MB90560, MB90560L and MB90565.

It can be used stand alone for software development and testing or as a simple

target board to work with the emulator system.

The board allows the designer immediately to start with the software development

before his own final target system is available.

•

Supports 16-Bit LX series MB90560, MB90560L, MB90565

•

Fully supports 3V and 5V environment

•

QFP-64 or DIP-64 package can be used

•

In-Circuit serial Flash programming

•

All resources available for evaluation

•

All pins routed to connectors

•

4MHz main crystal

•

Two UART Interfaces (3V and 5V operating)

•

8 User LEDs

•

Reset Button

•

Two Buttons configurable for external interrupts

•

Prototyping area

The Flash-64P-M01/M09 was designed to support the MB90560/L series. It can

be used as a stand alone evaluation board or as a target board for emulator

debugger. The evaluation board supports two different packages:

Ø FPT-64P-M09 (square QPF64 package, 0,65mm pitch)

Ø DIP-64P-M01 (shrink DIP package)

Note: The board can only be mounted with one microcontroller. So never

plug in two microcontrollers at the same time!

Flash-64P-M01/M09

Page 6