Fujitsu GA-8STXC P4 Titan-DDR 사용자 설명서 - 페이지 20

{카테고리_이름} Fujitsu GA-8STXC P4 Titan-DDR에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu GA-8STXC P4 Titan-DDR 43 페이지.

페이지 인쇄
Fujitsu GA-8STXC P4 Titan-DDR 사용자 설명서
16) S_IRQ (Serial IRQ Connector)
1
17) IR
1
VCC(+5V)
IR Data Output
N C
GND
IR Data Input
18) CI (CASE OPEN)
1
19) CLR_CMOS (Clear CMOS)#
1-2 close: Normal
1
2-3 close: Clear CMOS
1
GA-8STXC Motherboard
GND
Signal
GND
Signal
This connector is for special design,
for example: PCMCIA add on card.
Please make sure that pin 1 on the IR device
is align with pin 1 of the connector. To enable
the IR function on the board, you are required
to purchase an option IR module. For more
detail information please contact your nearest
dealer for optional IR device.
This 2 pin connector allows your system to
enable or disable the system alarm if the
system case begin remove.
You may clear the CMOS data to its default
values by this jumper. To clear CMOS, tem-
porarily short 1-2 pin.
- 20 -