Fujitsu MB95390 Series 설정 매뉴얼 - 페이지 14

{카테고리_이름} Fujitsu MB95390 Series에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu MB95390 Series 17 페이지. 8-bit microcontroller
Fujitsu MB95390 Series에 대해서도 마찬가지입니다: 설정 매뉴얼 (18 페이지)

페이지 인쇄
Fujitsu MB95390 Series 설정 매뉴얼

2.4 HW Module Description

2.4.1 Power Module

Input external power supply from outside. Please read the following instructions before
using.
Output voltage: 5V
Output Current: 500mA
Connection: Power connector (DC IN)
2.4.2

BGMA Interface

To start debugging using a BGMA, users can connect IDC10 socket from the BGMA to
BGMA IF on an EV board before power on.
2.4.3

Test Pin

All MCU ports are easy accessible through test pins.
2.4.4

Connector

The EV board can be connected to MB95330 EV board through the four 8-pin connectors.
Then the EV board can support 120 degree inverter motor driving solution.
EV BOARD MB2146-441-E V1.0
Chapter 2 EV Board Introduction
MCU-AN-500092-E-10 – Page 12