Fujitsu MOTORKIT-91F267-MC 사용자 설명서 - 페이지 14

{카테고리_이름} Fujitsu MOTORKIT-91F267-MC에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu MOTORKIT-91F267-MC 33 페이지. Frlite family

3.3 Analog Power Supply Voltage (JP: 15, 16, 21, 22)

The power supply as well as the positive reference voltages for the A/D-converter can be

provided internally or externally.

JP15, JP22 connect power supply voltages (AVcc and AVss)

JP16, JP21 connect reference voltages (AVRH1, AVRH2 to AVcc)

Jumper

JP15 (AVcc)

JP16 (AVRH2)

JP21 (AVRH1)

JP22 (AVss)

By default the resistor networks are not mounted on the board

By default, the A/D-converter supply and reference voltages are the same as the

microcontroller supply voltage.

Note:

If JP15, JP16 and J11 are open, the user has to supply an adequate analogue voltage

supply (AVcc and AVss) to the A/D-converter.

If JP16 is open, the resistors R22 and R27 define AVRH2.

If JP21 is open, the resistors R21 and R26 define AVRH1.

By default the resistor networks are not mounted on the board.

MotorKit-91F267-MC User Guide

Setting

Description

Closed

AVcc is connected to Vcc

Open

AVcc is disconnected from Vcc

Closed

AVRH2 is connected to AVcc

Open

AVRH defined by resistor network

Closed

AVRH1 is connected to AVcc

Open

AVRH defined by resistor network

Closed

AVss is connected to GND

Open

AVss is disconnected from GND

- 14 -