Fujitsu P4 Titan GA-8I848PM-FS 사용자 설명서 - 페이지 30

{카테고리_이름} Fujitsu P4 Titan GA-8I848PM-FS에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu P4 Titan GA-8I848PM-FS 45 페이지. P4 titan series motherboard

Floppy 3 Mode Support (for Japan Area)

Disabled

Normal Floppy Drive. (Default value)

Drive A

Drive A is 3 mode Floppy Drive.

Drive B

Drive B is 3 mode Floppy Drive.

Both

Drive A & B are 3 mode Floppy Drives.

Halt on

The category determines whether the computer will stop if an error is detected during power up.

NO Errors

The system boot will not stop for any error that may be detected and you

will be prompted.

All Errors

Whenever the BIOS detects a non-fatal error the system boot will be stopped.

All, But Keyboard

All, But DisketteThe system boot will not stop for all errors except a disk error.

All, But Disk/Key

disk errors.

Memory

The category is display-only which is determined by POST (Power On Self Test) of the BIOS.

Base Memory

The POST of the BIOS will determine the amount of base (or conventional) memory installed

in the system.

The value of the base memory is typically 512 K for systems with 512K memory installed on

the motherboard, or 640 K for systems with 640 K or more memory installed on the motherboard.

The BIOS determines how much extended memory is present during the POST.

This is the amount of memory located above 1MB in the CPU's memory address map.

GA-8I848PM-FS Motherboard

The system boot will not stop for all errors except a keyboard error.

(Default value)

The system boot will not stop for all errors except keyboard and

- 30 -