Fujitsu P4 Titan-DDR GA-8STXC 사용자 설명서 - 페이지 9
{카테고리_이름} Fujitsu P4 Titan-DDR GA-8STXC에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu P4 Titan-DDR GA-8STXC 43 페이지. P4 titan-ddr
Fujitsu P4 Titan-DDR GA-8STXC에 대해서도 마찬가지입니다: 사용자 설명서 (44 페이지)
![Fujitsu P4 Titan-DDR GA-8STXC 사용자 설명서](/uploads/products/server2/2465890/2465890.png)
Step 2: Install memory modules
The motherboard has 3 dual inline memory module (DIMM) sockets. The BIOS will automatically
detects memory type and size. To install the memory module, just push it vertically into the DIMM
socket. The DIMM module can only fit in one direction due to the notch. Memory size can vary
between sockets.
Support Unbuffered DDR DIMM Sizes type:
64 Mbit (2Mx8x4 banks)
128 Mbit(2Mx16x4 banks)
512 Mbit(16Mx8x4 banks)
Install memory in any combination table:
DDR1 (Bank 0&1)
SS
DS
SS
DS
DS
SS
DS
DS
DS
SS: Single Side, DS: Double Side
Note:
1. GA-8STXC can only support 4 banks of DDR333.
2. If you mix DDR266 and DDR333 then all modules will run as DDR266.
GA-8STXC Motherboard
64 Mbit (1Mx16x4 banks)
256 Mbit(8Mx8x4 banks)
512 Mbit(8Mx16x4 banks)
DDR2 (Bank 2&3)
none
none
SS
SS
DS
SS
SS
DS
DS
- 9 -
128 Mbit(4Mx8x4 banks)
256 Mbit(4Mx16x4 banks)
DDR3 (Bank 4&5)
none
none
none
none
none
SS
SS
SS
DS