Fujitsu QFP-100P 운영 매뉴얼 - 페이지 6

{카테고리_이름} Fujitsu QFP-100P에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu QFP-100P 16 페이지. F2mc-8fx family 0.65 mm pitch header board

4. Notes on Designing

■ Notes on designing printed circuit board for the user system

When the header board is connected to the user system, the parts mounted around the NQPACK in

the user system may be touched the header board if the height of the parts is tall. To prevent this,

design the printed circuit board for the user system such that the components do not exceed the height

shown in Figure 2. Figure 2 shows dimension figure of the header board.

User system

U1:User system I/F connector

CN3:Incorrect insertion prevention socket

CN1/CN2:MCU board I/F connector

*1 : The height differs slightly depending on how the YQPACK and NQPACK are

engaged.

*2 : Japan Aviation Electronics Industry, Limited

Figure 2 Header board dimensions

13.0 mm

40.0 mm

30.0 mm

PCW-1-1PW

:MAC EIGHT

WR-120SB-VF-N1 : JAE *

4-R5.0

WR-120SB-VF-N1 : JAE *

YQSOCKET100RBF

:Tokyo Eletech Corporation

YQPACK100RB

:Tokyo Eletech Corporation

NQPACK100RB179

:Tokyo Eletech Corporation