Fujitsu Siemens D1156 기술 매뉴얼 - 페이지 16
{카테고리_이름} Fujitsu Siemens D1156에 대한 기술 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu Siemens D1156 22 페이지.
페이지 인쇄
Settings with switches
Recovering System BIOS - switch 2
Switch RCV enables recovery of the old system BIOS after an attempt to update has failed. To
restore the old system BIOS you need a Flash BIOS Diskette (please call our customer service
center).
On
The System BIOS executes from standard floppy drive A: and the inserted "Flash-
BIOS-Diskette" restores the System BIOS on the system board.
Off
Normal operation (default setting).
Write protection for floppy disks - switch 3
Switch 3 is used to define whether floppy disks can be written or deleted in the standard floppy disk
drive. To write and delete floppy disks, the write-protection in BIOS Setup must be disabled (in menu
Security, the field Diskette Write must be set to Enabled).
The standard floppy disk drive is write-protected.
On
Off
Read, write and delete floppy disks is possible (default setting).
Clock frequency - switches 5 to 8
New processors select the clock frequency automatically. The settings of the switches 5 to 8 will be
ignored.
The switches may only be set as specified in the tables below for the particular processor
!
used.
There are also processors, which automatically always operate at the proper frequency,
regardless of the switch position.
As these new processors do not differ externally from the previous processors, we
recommend always setting the switches in accordance with the processor.
This system board you may use with Pentium II processors with 100 MHz Front Side Bus
or with Pentium III processors with 100 MHz Front Side Bus or with Celeron processors
with 66 MHz Front Side Bus.
Information on which processors can be used is available from your sales outlet or the
customer service center.
Celeron with 66 MHz Front Side Bus:
processor
233 MHz
266 MHz
300 MHz
333 MHz
366 MHz
400 MHz
433 MHz
466 MHz
500 MHz
533 MHz
8 - English
switch 5
off
on
off
on
off
on
off
on
off
on
switch 6
off
on
on
off
off
on
on
off
off
on
switch 7
on
off
off
off
off
on
on
on
on
off
A26361-D1156-Z120-6-7419
switch 8
on
on
on
on
on
off
off
off
off
off