Fujitsu SK-91465X-100PMC 사용자 설명서 - 페이지 24

{카테고리_이름} Fujitsu SK-91465X-100PMC에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu SK-91465X-100PMC 40 페이지.

4 Programming the internal Flash

All Flash devices have an internal bootloader for asynchronous as well as synchronous

Flash-programming:

< asynchronous-serial Flash-programming via X6 (UART A)

< synchronous-serial Flash-programming via J4

To use the asynchronous Flash programming mode, follow these steps:

1. Install the FME FR Flash programmer.

2. Connect the Starterkit (UART A) to the PC using a 1:1 cable.

3. Start the Flash programmer by double-clicking on the flashprg.exe icon

4. Select appropriate MCU type, COM-Port, baudrate, and the path to your HEX-File

(.mhx)

5. Power-off the board or assert and hold RESET

UG-910056-11

SK-91465X-100PMC User Guide

Chapter 4 Programming the internal Flash

- 24 -