A-Neu Video HD-88K 사용 설명서 - 페이지 15

{카테고리_이름} A-Neu Video HD-88K에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. A-Neu Video HD-88K 20 페이지.

페이지 인쇄

NEUVIDEO

EDID LEARNING MODE

Learning EDID Single to Single

Step 1.

Press the EDID button

Step 2.

Press the DESTINATION #8 button row

Step

3. Press the SOURCE #5 button row

Step 4.

Press ENTER button

Learning EDID Single to multiple

Step 1.

Press the EDID button

Step 2.

Press the DESTINATIONS #1~8 button row Copy any 1~8 Destinations EDID.

Step 3.

Press the SOURCE #1, #6 ~ #8 button row Learning the Destination EDID link to source #1, #6 ~ #8.

Step 4.

Press ENTER button

Learning EDID Single to ALL

Step 1.

Press the EDID button

Step 2.

Press Destination button 1 THRU 8

Step 3.

Press ALL button

Step 4.

Press ENTER button

EDID status

Step 1.

Press the EDID button

Step 2.

Press the EDID button

How to setup FSS

Function

Step 1.

Press the Destination #1~8 button row

Then Press the Source #1~8 button row

Step 2.

Press the EDID button

Step 3.

Press ENTER button

Step 4.

Press the EDID button

Step 5.

Press ENTER button

SINGLE LEARNING #1 definition

1. Switcher will LEARN destination EDID and pass the selected source.

2. To set up learning between a single destination and single source: Press EDID button > Press DESTINATION 1 THRU 8 > Press

SOURCE 1 THRU 8 > Press ENTER to confirm. Switcher will learn destination EDID to source device.

3. To set up learning between a single destination and Multiple sources: Press EDID button > Press DESTINATION 1 THRU 8 >

Press the majority SOURCES 1 THRU 8 > Press ENTER. Switcher will learn single destination EDID to many source devices.

4. How to Learning single destinations with all sources. Press EDID button > Press ALL button > Press ENTER to confirm.

MULTIPLE LEARNING #2 DEFINITION

1. Switcher will multiple LEARN destination EDID and pass the selected source.

2. To set up multiple learning between a single destination and single source: Press EDID button > Press OFF button > Press

DESTINATION 1 THRU 8 > Press ENTER to confirm. Switcher will learn destination EDID to source device.

3. When the Source has "Learned" the EDID data from a destination, it will save that EDID information into EPROM and the EDID

data will not change. To change a saved HDMI EDID information, you have to select a new LEARNING destination to source or

Disable the LEARNING.

Example : Learn Destination #8 EDID To Source #5.

The button will flash blue and the display will show the current Embedded EDID Status.

Copy the Destination #8 Display EDID.

Learning the Destination #8 EDID To Source # 5.

To confirm entries.

Learning destination EDID link to the majority Sources

The button will flash blue and the display will show the current Embedded EDID Status.

To confirm entries.

Learning destination EDID link to All Sources

The button will flash blue and the display will show the current Embedded EDID Status.

Learning anyone 1~8 Destination EDID to all sources.

Learning selected destination EDID to all sources.

To confirm entries.

To view the current EDID status.

The button will flash blue and the display will show the current Embedded EDID Status.

To exit.

Fast Speed Start

To setup and Install all devices.

Select a optimum status of Embedded EDID mode.

To conform entries.

To select the EDID FSS

mode.

To conform entries.

Single Learning EDID from Destination to Source

Multiple Learning EDID from Destination to Source

EDID FUNCTION