A-Neu Video HD-88Kp 사용 설명서 - 페이지 17

{카테고리_이름} A-Neu Video HD-88Kp에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. A-Neu Video HD-88Kp 20 페이지. Hdmi matrix switch

페이지 인쇄

NEUVIDEO

ETHERNET / RS-232 SERIAL INTERFACE CONNECTS a PC or CONTROL SYSTEM

VERSION COMPATIBLE V2.0

For a complete list of commands, please reference external document extended Ethernet Protocol Instruction Manual.

Example of the commanded string to select Inputs:

Function

Set channel status

Command Example

OUTPUT02 04;

Note: Control the switcher

SPD: Speed

LINK: Ethernet link

RJ-45 Female 8P-8C Connector

ETHERNET TCP/IP PROTOCOL COMMANDS ( Ethernet / RS-232 Control driver V2.0 )

*** The Ethernet port and RS-232 port cannot be used simultaneously. Any connection to the Ethernet Control port will disable serial

commands sent to the RS-232 port.***

HD-88Kp

Device

RS-232 SERIAL INTERFACE PROTOCOL COMMANDS ( Ethernet / RS-232 Control driver V2.0 )

The HD-88Kp switcher can be controlled via the RS-232 serial control port to allow for interfacing to a PC, or similar third party control

system. The serial communication parameters are 9600 baud, 8 bit, No Parity and 1 stop bit - this is often referred to as 9600 8N1. When

the unit recognizes a complete command it will perform the requested action - there is no delimiter character required.

ETHERNET & rs-232 SERIAL INTERFACE

Command

OUTPUTxx yy;

Response

HD-88 00;

HD-88 01;

ETHERNET SERIAL INTERFACE

Ethernet

TXOP

TXON

RXIP

RXIN

GND

RS-232 Configuration

RS-232 cable is a straight thru cable and not null-modem

Definition

GND

Variables

xx = Output Channel

yy = Input Channel

Description

Set output 2 to input 4

UN-KNOW Command

TCP, Port 5000

Reference

TX +

TX -

RX +

RX -

Definition

DCD

DTR

GND

DSR

RTS

CTS