Indesit IWE 7125 S 사용 설명서 지침 - 페이지 6

{카테고리_이름} Indesit IWE 7125 S에 대한 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Indesit IWE 7125 S 24 페이지.

페이지 인쇄

Running a wash cycle

1. SWITCH THE MACHINE ON. Press the

button; the START/PAUSE indicator light will flash

slowly in a green colour.

2. LOAD THE LAUNDRY. Open the porthole door.

Load the laundry, making sure you do not exceed

the maximum load value indicated in the table of

programmes on the following page.

3. MEASURE OUT THE DETERGENT. Pull out the

detergent dispenser drawer and pour the detergent

into the relevant compartments as described in

"Detergents and laundry".

4. CLOSE THE DOOR.

5. SELECT THE WASH CYCLE. Set the WASH

CYCLE knob to the desired programme; a

temperature and spin speed is set for each wash

cycle; these may be adjusted. The duration of the

cycle will appear on the display.

6. CUSTOMISE THE WASH CYCLE. Use the

relevant buttons:

Modifying the temperature and/or spin

speed. The machine automatically displays the

maximum temperature and spin speed values set

for the selected cycle, or the most recently-used

settings if they are compatible with the selected

cycle. The temperature can be decreased by

pressing the

setting is reached. The spin speed may be

progressively reduced by pressing the

until it is completely excluded (the "OFF" setting). If

these buttons are pressed again, the maximum

values are restored.

Setting a delayed start.

To set a delayed start for the selected programme,

press the corresponding button repeatedly until the

required delay period has been reached. When this

option is enabled, the

display. To remove the delayed start option press

the button until the text "OFF" appears on the

display.

settings.

• Press the button to enable the option; the

indicator light corresponding to the button will

switch on.

• Press the button again to disable the option; the

indicator light will switch off.

If the selected option is not compatible with the

programmed wash cycle, the indicator light will

flash and the option will not be activated.

If the selected option is not compatible with

another option which has been selected previously,

button, until the cold wash "OFF"

symbol lights up on the

Modifying the cycle

the indicator light corresponding to the first option

selected will flash and only the second option will be

activated; the indicator light corresponding to the

enabled option will remain lit.

The options may affect the recommended load

value and/or the duration of the cycle.

7. START THE PROGRAMME. Press the START/

PAUSE button. The corresponding indicator light will

become green, remaining lit in a fixed manner, and

the door will be locked (the DOOR LOCKED

symbol

it is in progress, pause the washing machine using

the START/PAUSE button (the START/PAUSE

indicator light will flash slowly in an orange colour);

then select the desired cycle and press the START/

PAUSE button again.

To open the door while a cycle is in progress, press

the START/PAUSE button; if the DOOR LOCKED

symbol is switched off the door may be opened.

Press the START/PAUSE button again to restart the

wash cycle from the point at which it was

interrupted.

8. THE END OF THE WASH CYCLE. This will be

indicated by the text "END" on the display; when

the DOOR LOCKED

may be opened. Open the door, unload the laundry

and switch off the machine.

If you wish to cancel a cycle which has already

begun, press and hold the

button,

stopped and the machine will switch off.

will be on). To change a wash cycle while

symbol switches off the door

button. The cycle will be