Indesit IWME 146 사용 설명서 지침 - 페이지 11

{카테고리_이름} Indesit IWME 146에 대한 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Indesit IWME 146 20 페이지.

Leds

The LEDS provide important information.

This is what they can tell you:

Delay set:

If the Delay Timer function has been enabled, once you

have started the programme, the LED corresponding to

the delay set will begin to flash:

As time passes, the remaining delay will be displayed,

and the corresponding LED will flash:

Once the set delay is complete, the flashing LED will turn

off and the programme set will start.

ON-OFF/DOOR LOCK led:

If this LED is on, the appliance door is locked to prevent it from being opened accidentally; to avoid any damages, wait for

the LED to flash before you open the appliance door.

The rapid flashing of the ON-OFF/DOOR LOCK Led together with the flashing of at least one other LED indicates there is an

abnormality.

Cycle phase under way:

During the wash cycle, the LEDs gradually illuminate on to

indicate the cycle phase under way:

Prewash

Wash

Rinse

Spin cycle

Note: during draining, the LED corresponding to the Spin

cycle phase will be turned on.

Function buttons

The FUNCTION BUTTONS also act like LEDS.

When a function is selected, the corresponding button is

illuminated.

If the function selected is incompatible with the programme

set, the button will flash and the function will not be enabled.

If you set a function that is incompatible with another fun-

ction you selected previously, only the last one selected

will be enabled.