Indesit IWME 146 사용 설명서 지침 - 페이지 4
{카테고리_이름} Indesit IWME 146에 대한 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Indesit IWME 146 20 페이지.
페이지 인쇄
As the colours of the wires in the lead may
GB
not correspond with the coloured markings
identifying the terminals in your plug, proceed
as follows:
Connect Green & Yellow wire to terminal mar-
ked E or
Yellow.
Connect Brown wire to terminal marked L or
coloured Red.
Connect Blue wire to terminal marked N or
coloured Black.
If a 13 amp plug (BS 1363) is used it must be
fitted with a
13 amp fuse, either in the plug or adaptor or at
the distribution board.
If you are in any doubt the electrical supply to
your machine, consult a qualified electrician
before use.
How to connect an alternative plug:
The wires in this mains lead are coloured in
accordance with the following code:
BLUE
BROWN
GREEN & YELLOW EARTH (E)
GREEN &
YELLOW
BROWN
BLUE
Disposing of the appliance:
When disposing of the appliance please
remove the plug by cutting the mains cable
as close as possible to the plug body and
dispose of it as described above.
! The washing machine should not be in-
stalled in an outdoor environment, not even
when the area is sheltered, because it may
be very dangerous to leave it exposed to rain
and thunderstorms.
! When the washing machine is installed, the
mains socket must be within easy reach.
! Do not use extensions or multiple sockets.
! The power supply cable must never be
bent or dangerously compressed.
4
or coloured Green or Green &
NEUTRAL (N)
LIVE (L)
13 ampere fuse
CROSS-BAR
CORD GRIP
! The power supply cable must only be repla-
ced by an authorised serviceman.
Warning! The company denies all liability if
and when these norms are not respected.
The first wash cycle
Once the appliance has been installed, and
before you use it for the first time, run a wash
cycle with detergent and no laundry, setting the
90°C programme without a pre-wash cycle.